• Company Design
  • Access to Nexxtmove EV platform in Driver mode (Fox Edition)
  • SIGFOX (Fox Edition)

Nexxtender Fox

Nexxtender FOX is the machine to machine charging station. The installation is very easy and can be done by your trusted electrical contractor. In addition to being safe and powerful, the main differentiator of the Nexxtender FOX is the communication through SIGFOX, far more affordable than GPRS or 3G. Included in every Nexxtender is an access to the Nexxtmove software platform, allowing the EV driver to monitor the charging activity. In less than 5 minutes, you can upgrade the Nexxtender Fox to Nexxtender Advance. No specialized technician needed. Goodbye obsolence. Hello Modularity!

Features

With Nexxtender Fox, you can recharge all available electric cars.

Depending on the connection and the type of vehicle, you will get following charge speeds.

- 1 Phase 16A : 3,7kW (17 km per hour)

- 3 Phases 16A : 11kW (50 km per hour)

- 1 Phase 32A : 7,2kW (35 km per hour)

- 3Phases 32A : 22kW (100 km per hour)


Switch to another configuration

Description

The Single Wallbox presents one Type 2 connector in a beautiful design.shown in the video. Nexxtender Fox Wallbox can be installed indoor or outdoor. A wall, a grid connection and a SIGFOX signal are all you need.

Description

The Pole is the ideal solution for the integration of the Nexxtender FOX in a parking lot. The stainless steel Pole contains an electrical cubicle including a circuit breaker and a differential protection. The pole can be personalised to the the visual identity of your company.

Description

Nexxtender Fox Wallbox can be installed indoor or outdoor. A wall, a grid connection and a SIGFOX signal are all you need. In the Dual version, each socket can deliver up to 22 kW.

Description

Description

The Pole is the ideal solution for the integration of the Nexxtender base in a parking lot. The stainless steel Pole contains an electrical cubicle including a circuit breaker and a differential protection. In the dual version, each connector can deliver up to 22 kW.

The connection can be done with one or two cables. If the connection is made with one cable, the load can be made available to one connector if the other one is free.

Accessories

T2S Connector

T2S Connector

Wood support structure (for Single or Dual)

Wood support structure (for Single or Dual)

Cable holder

Cable holder

Accessories

T2S Connector

T2S Connector

Wood support structure (for Single or Dual)

Wood support structure (for Single or Dual)

Cable holder

Cable holder

Downloads

Specifications

  • IEC compliant Mode 3 per IEC 61851
  • Vehicle Interface Single : Type 2 Connector Dual: 2x Type 2 Connectors
  • Voltage and Current Rating From 230V AC at 16A to 400V AC at 32A
  • Charging Power Output From 3.7 kW to 22 kW
  • Environment IP 54 Indoor/Outdoor
  • Status LED Indication
  • Standby Power Single 5.3 VA - Dual : 5.9 VA
  • External casing Plastic : Polystyrene Glass*(front part): tempered safety glass
  • Operating Humidity Up to 95% non-condensing
  • Operating Temperature -20°C + 60°C
  • Cable type 2 Three-phase 32 A (4m or 7.5m)
  • Approximate Shipping Weight single : 4.5 - 5.5kg dual from 6.5 to 8.5 kg
  • Dimensions (HxWxD) Single : 327 x 247 x 123 Dual : 527 x 247 x 123 Pole : 142 x 54 x 25
  • Communication Open Charge Point Protocol (OCPP)