• Company Design
  • Access to Nexxtmove EV platform in Driver mode (Fox Edition)
  • Screen
  • Wifi
  • Lan
  • Residual Current Device (RCD)
  • Smart grid
  • 3G
  • RFiD/NFC reader (option)
  • Dynamic QR Payment

Nexxtender Advance

Nexxtender Advance is an effective and complete smart charging station. With a charging power from 3.7 kW up to 22 kW, Nexxtender Advance delivers the power required when it is required. Thanks to its various communication features, the Nexxtender makes access control, energy tracking and specific charging scenarios very user-friendly. Nexxtender advance features a high resolution screen and 5 capacitive buttons. This modern interface opens a realm of possibilities ranging from the definition of a bespoke visual identity to the integration of scenarios like QR Code payment or user input of desired range and charge time. The Nexxtender communicates with OCPP platforms, making remote control and billing accessible to fleet and mobility managers.


Features

With the Nexxtender Advance, you can recharge all available electric cars.

Depending on the connection and the type of the vehicle, you will get following charge speeds:

  • 1 Phase 16 A: 3.7 kW (17 km per hour)
  • 3 Phases 16 A: 11 kW (50 km per hour)
  • 1 Phase 32 A: 7.2 kW (35 km per hour)
  • 3 Phases 32 A: 22 kW (100 km per hour)

Switch to another configuration

Description

The Single Wallbox presents one Type 2 connector in a beautiful design. Nexxtender Advance Wallbox can be installed indoor or outdoor. A wall and a grid connection are all you need. The communication options are: GPRS/3G, Wifi and LAN. The authorisation to charge is given by badging (RFiD/NFC reader), by sms or by QR Code.

Description

The Dual Wallbox presents two Type 2 connectors in a beautiful design. As the communication unit and the display are shared by the 2 charging point, the dual wallbox is the most economical connected charging device. Nexxtender Advance Wallbox can be installed indoor or outdoor. A wall and a grid connection are all you need. The communication options are: GPRS/3G, Wifi and LAN. The authorisation to charge is given by badging (RFiD/NFC reader), by sms or by QR Code.

Description

The Pole is the ideal solution for the integration of the Nexxtender Advance in a parking lot. The stainless steel pole contains an electrical cubicle including a circuit breaker and a differential protection. 

Description

The Pole is the ideal solution for the integration of the Nexxtender base in a parking lot. The stainless steel Pole contains an electrical cubicle including a circuit breaker and a differential protection. In the dual version, each connector can deliver up to 22 kW. 


The connection can be done with one or two cables. If the connection is made with one cable, the load can be made available to one connector if the other one is free.

Accessories

T2S Connector

T2S Connector

Wood support structure (for Single or Dual)

Wood support structure (for Single or Dual)

Cable holder

Cable holder

Videos

How to charge with Nexxtender Advance in direct mode

How to charge with Nexxtender Advance in direct mode

How to charge with Nexxtender Advance using RFiD authorization

How to charge with Nexxtender Advance using RFiD authorization

QR Pay with Nexxtender Advance

QR Pay with Nexxtender Advance

How to remove a RFiD badge from the local whitelist

How to remove a RFiD badge from the local whitelist

How to configure a Nexxtender Advance

How to configure a Nexxtender Advance

How to create a new user and assign an RFID tag on Nexxtmove me

How to create a new user and assign an RFID tag on Nexxtmove me

Accessories

T2S Connector

T2S Connector

Wood support structure (for Single or Dual)

Wood support structure (for Single or Dual)

Cable holder

Cable holder

Videos

How to charge with Nexxtender Advance in direct mode

How to charge with Nexxtender Advance in direct mode

How to charge with Nexxtender Advance using RFiD authorization

How to charge with Nexxtender Advance using RFiD authorization

QR Pay with Nexxtender Advance

QR Pay with Nexxtender Advance

How to remove a RFiD badge from the local whitelist

How to remove a RFiD badge from the local whitelist

How to configure a Nexxtender Advance

How to configure a Nexxtender Advance

How to create a new user and assign an RFID tag on Nexxtmove me

How to create a new user and assign an RFID tag on Nexxtmove me

Accessories

T2S Connector

T2S Connector

Cable holder

Cable holder

Pole personnalisation

Pole personnalisation

Videos

How to charge with Nexxtender Advance in direct mode

How to charge with Nexxtender Advance in direct mode

How to charge with Nexxtender Advance using RFiD authorization

How to charge with Nexxtender Advance using RFiD authorization

QR Pay with Nexxtender Advance

QR Pay with Nexxtender Advance

How to remove a RFiD badge from the local whitelist

How to remove a RFiD badge from the local whitelist

How to configure a Nexxtender Advance

How to configure a Nexxtender Advance

How to create a new user and assign an RFID tag on Nexxtmove me

How to create a new user and assign an RFID tag on Nexxtmove me

Accessories

T2S Connector

T2S Connector

Cable holder

Cable holder

Pole personnalisation

Pole personnalisation

Videos

How to charge with Nexxtender Advance in direct mode

How to charge with Nexxtender Advance in direct mode

How to charge with Nexxtender Advance using RFiD authorization

How to charge with Nexxtender Advance using RFiD authorization

QR Pay with Nexxtender Advance

QR Pay with Nexxtender Advance

How to remove a RFiD badge from the local whitelist

How to remove a RFiD badge from the local whitelist

How to configure a Nexxtender Advance

How to configure a Nexxtender Advance

How to create a new user and assign an RFID tag on Nexxtmove me

How to create a new user and assign an RFID tag on Nexxtmove me

Specifications

  • IEC Compliant Mode 3 per IEC 61851
  • Vehicle Interface Type 2 connector
  • Voltage and Current Rating From 230V AC at 16A to 400V AC at 32A
  • Charging Power Output From 3.7 kW to 22kW
  • Electrical protection 30mA Residual Current Device
  • RFID Reader ISO 15693 and ISO 14443 compliant
  • Environment IP 54 Indoor/Outdoor
  • Display Graphical LCD Color Display
  • Network Ethernet/ GPRS ( with internal antenna)/ Wifi
  • Standby Power 5.3 VA
  • Internal casing Stainless steel
  • External casing Polystyrene
  • Communication Open Charge Point Protocol
  • Update Remote software update
  • Operating Humidity Up to 95% non-condensing
  • Operating Temperature -20°C + 60°C
  • Cable not included
  • Approximate Shipping Weight 5 kg (Single) 7.5 kg (Dual)
  • Dimensions (HxWxD) 327 x 247 x 123 mm (Single) 527 x 247 x 123 mm (Dual)
  • Adjustable current rating Per connector (from 16 A to 32 A)